ECHO Flow Under-Sink Hydrogen Water Machine – No Faucet

This product isn't available in your country.

You can still read our guides and see what is sold where you are:

ECHO Flow Under-Sink Hydrogen Water Machine – No Faucet

$2,499.99

A filter-less under-sink unit that adds hydrogen to water from an existing reverse osmosis or whole-house filter, for kitchens that want hydrogen water without counter clutter.

Opens the seller’s website in a new tab. Price and availability are set by the seller.

  • Hand-picked by the ItHurts team
  • Secure checkout on the seller’s site
  • Shipped and supported by the seller
The details

About this product

This is a kitchen appliance rather than a pain product. The ECHO Flow sits out of sight in the cabinet under your sink and adds hydrogen to filtered water as it runs to the tap. It’s in our wellness and hydration section for people who already have water filtration at home and are curious about hydrogen water.

How it works

The Echo Hydrogen Module dissolves 99.99% pure molecular hydrogen into the water stream, up to 1.21 ppm at the tap, without changing pH. ORP is listed at up to −500 mV, depending on your water and flow rate. Sensors start production when you open the tap and stop when you close it, so nothing sits in a tank. An internal pump keeps flow at up to 1.2 liters a minute, even after a reverse osmosis tank.

It needs filtered water first

The Flow has no filters of its own. It must sit downstream of a reverse osmosis or whole-house system delivering at least 10 psi. Unfiltered tap or well water can’t be used and isn’t covered by the warranty. Echo sells a tankless RO system as an add-on if you don’t have one.

Install checklist

  • 9.5 × 9.5 inches of cabinet wall, 3.5 inches deep.
  • A live outlet under the sink (it uses a 100 W, 12 V adapter); Echo’s manual says to use a surge protector.
  • This is the No Faucet option, for a compatible accessory faucet that needs a 15/16 to 1 inch hole in the countertop.
  • Output can be split to the faucet, a refrigerator water line or an ice maker.
  • In the box: the unit, power supply, 5 ft of 1/4 inch tubing, two clips and a removal fork.

Supply pressure should be 10 to 71 psi, and water temperature 41 to 104°F. Echo says not to run the unit continuously for more than 10 minutes at a time. It weighs 3.85 lbs and carries a 10-year warranty (excluding use without prefiltration). It was formerly sold as the Echo H2 Server.

Keep it in perspective

Staying well hydrated matters when you live with pain, and plain water does that job. If you have a health condition or dietary restrictions, check with a clinician first.

The free Pain Check-Up looks at daily habits as part of the picture, and the wellness and rehab groups are a place to talk about routines.

This is a paid/affiliate link — ItHurts.com may earn a commission if you buy, at no extra cost to you.

From our community

Member reviews

Description

This is a kitchen appliance rather than a pain product. The ECHO Flow sits out of sight in the cabinet under your sink and adds hydrogen to filtered water as it runs to the tap. It’s in our wellness and hydration section for people who already have water filtration at home and are curious about hydrogen water.

How it works

The Echo Hydrogen Module dissolves 99.99% pure molecular hydrogen into the water stream, up to 1.21 ppm at the tap, without changing pH. ORP is listed at up to −500 mV, depending on your water and flow rate. Sensors start production when you open the tap and stop when you close it, so nothing sits in a tank. An internal pump keeps flow at up to 1.2 liters a minute, even after a reverse osmosis tank.

It needs filtered water first

The Flow has no filters of its own. It must sit downstream of a reverse osmosis or whole-house system delivering at least 10 psi. Unfiltered tap or well water can’t be used and isn’t covered by the warranty. Echo sells a tankless RO system as an add-on if you don’t have one.

Install checklist

  • 9.5 × 9.5 inches of cabinet wall, 3.5 inches deep.
  • A live outlet under the sink (it uses a 100 W, 12 V adapter); Echo’s manual says to use a surge protector.
  • This is the No Faucet option, for a compatible accessory faucet that needs a 15/16 to 1 inch hole in the countertop.
  • Output can be split to the faucet, a refrigerator water line or an ice maker.
  • In the box: the unit, power supply, 5 ft of 1/4 inch tubing, two clips and a removal fork.

Supply pressure should be 10 to 71 psi, and water temperature 41 to 104°F. Echo says not to run the unit continuously for more than 10 minutes at a time. It weighs 3.85 lbs and carries a 10-year warranty (excluding use without prefiltration). It was formerly sold as the Echo H2 Server.

Keep it in perspective

Staying well hydrated matters when you live with pain, and plain water does that job. If you have a health condition or dietary restrictions, check with a clinician first.

The free Pain Check-Up looks at daily habits as part of the picture, and the wellness and rehab groups are a place to talk about routines.

This is a paid/affiliate link — ItHurts.com may earn a commission if you buy, at no extra cost to you.

Additional information

Hydrogen production

Up to 1.21 ppm

ORP

Up to −500 mV (depends on source water chemistry and flow rate)

Flow rate

Up to 1.2 L/min

Filtration

None · requires prefiltration

Minimum inlet pressure

10 psi

Product dimensions

9.5 × 9.5 × 3.5 in

Shipping dimensions

14 × 10 × 6 in

Weight

3.85 lbs

Installation

Under-counter

Power

Standard household outlet

Reviews

There are no reviews yet.

Be the first to review “ECHO Flow Under-Sink Hydrogen Water Machine – No Faucet”

Your email address will not be published. Required fields are marked *

Start chat to AI